11 of the best Raspberry Pi projects for beginners

The Raspberry Pi is a great little car – available, very compact and easy to use. But when you just got it, can be difficult to figure out which projects you should try first.

These projects Raspberry Pi for beginners are a great introduction to hardware and software features of Pi. Start with one of them!

Projects Rapberry Pi entry level to try.

Don’t assume that functionality this little girl will have a trace. Projects that you can construct, can be both simple and complex, just as much as you like.

In this guide we will look at 11 simple, basic projects Raspberry Pi the initial level of difficulty:

  • Add a button to your Pi
  • Install a test LED lamp
  • To build alarm motion sensor
  • Create a digital photo frame
  • Learn to control your Pi over the Internet
  • Create your own personal cloud server
  • To configure a wireless connection with the old printer
  • To write a game from scratch
  • Make music using Sonic Pi
  • To raise server for games online
  • To set auto-play music when you enter the room

All of these projects can be launched on any model of the Raspberry P and with different power levels.

If you are a beginner and have just purchased a Raspberry Pi, you need to do something before you start. Here is a very important guide for installing operating system Raspberry Pi.

1.Add a button to the Raspberry Pi

One of the few things that are missing on the Raspberry Pi, is button. You basically connect them to power on, boot the operating system and start the computer. In short, the computer still need at least one button, so this project is great getting started with Raspberry Pi. Easiest to implement using breadboard (breadbord) and additional wiring, resistor and libraries RPi.GPIO. Worried that you are a beginner in electronics? This project is perfect.

Programmed in Python, this is a great project for any beginner to understand the importance of the GPIO of the Raspberry Pi.

2. Control led light bulb with a Raspberry Pi

Another easy project, the initial level of difficulty for the Raspberry Pi – learn to control led via GPIO.

The project includes the creation of a simple led circuit using breadboard, two LEDs, two resistors and some suitable wire. After configuration, the circuit can be controlled using Python. You will gain knowledge about Python, using the development boards and how to securely connect components such as LEDs and resistors.

3. Motion sensor and alarm

Sensors and alarms are often considered to be complicated projects, but your Raspberry Pi can work with the hardware via GPIO.

Creating a simple motion sensor and a piezo alarm will teach you the basics of working with external equipment using the Pi, and this project uses Python, so down the road you will start to learn programming in this language.

All you need is any model Pi passive infrared sensor, piezo buzzer, one resistor and some wires. Breadboard can also be useful. The alternative is to create an alarm system with an Arduino Board.

4. Inspiring digital photo frame Raspberry Pi

Although the components for this project can be more expensive than others, the result is an elegant digital photo frame. It will look good on your fireplace, on the wall or even beside your bed.

Raspberry Pi, LCD screen, controller and bezel – everything you need to run it. If you have an older monitor, or you can dig up, all ready! In our review used the official touch display Raspberry Pi, a component that you can purchase on Amazon.

5. The web interface for your Raspberry Pi

Configuring remote control on the Raspberry Pi is a great way to start learning the code required to interface your Pi with the outside world.

This demonstration shows how to enable and disable the LEDs with your mobile phone via a simple user interface. Also in the demo included the necessary scripts, so you don’t have to hand-write complex code. The study of these scripts will help you to understand how to configure the web application for your Pi.

6. Add the reset button on the Raspberry Pi

Raspberry Pi comes with many great features designed for a wide range of applications. But, unfortunately, he had no way to easily restart your device. Instead, the Pi rebooted with the command terminal or the desktop menu.

However, this inconvenience is easily circumvented by adding your own switch. It is a simple Raspberry Pi project that requires a pin or jumper or push-pull switch and cables. You will need to enter a few commands in terminal, but when you finish, reboot the Pi will be easy.

7. Make your printer wireless

Wireless printers are great, and in our days they are affordable. But if you have an old USB printer, take the time to send it to a landfill.

The Raspberry Pi can make old printer wireless with a few simple commands. If your model a Pi has no built-in Wi-Fi you can buy Wi-Fi adapter for $ 10. Just insert the Wi-Fi adapter, connect the printer, type a few commands, and remote printing is included in a few minutes.

This is a simple project the Raspberry Pi with a really useful purpose, so if you have an old printer, try it!

8. The game code from scratch

One of the key aspects of the Raspberry Pi is the development of skills of work with computer and programming. Thanks to the software included in the operating system Raspbian, you can write a game without programming skills.

Raspbian includes Scratch, a visual programming language designed for children. With just a few clicks you can create a simple game using block programming. Our guide to creating a basic game in Scratch will help you to start the path to programming.

9. Create music with Sonic Pi

Sonic Pi turns your Raspberry Pi in the car for the encoding of music, allowing you to use basic programming skills to create music. This can be anything from sound effects and short samples to full-length songs.

Although Sonic Pi uses its own programming language, the principles that you will learn when you create songs that will take you into the more traditional languages. Give yourself plenty of time to mess with this project is that it is pretty exciting!

10. Create a network game server

Projects, game servers, particularly suitable for later models of the Raspberry Pi is surprisingly easy. All you need to do is make sure the Pi is connected to your network and then install the server software for your favorite game from the command line.

Different games have servers that will work on the Pi, including Minecraft, Quake, FreeCiv, OpenTTD, and Terrarria. If you have any compatible games that are running on a different device, you can configure sessions network games on your Pi.

If you are looking for a simple Raspberry Pi project without any requirements for posting, this is a great option.

11. Herald your arrival on the Raspberry Pi

I want to finish this list, slightly indulge your secret desires, build. This project Raspberry Pi for beginners that plays a tune when you enter the room. However, this requires additional equipment, including the resistors and the reed switch.

To play music or a sound effect when opening door, the door need to attach the reed switch. Same for this build will need a network connection, the code and connect to the Pi GPIO. Although at first glance the project may seem complicated, in fact it is one of the easiest.

Videogid project, which is located above, will explain everything as detailed as possible.

Basic Raspberry Pi projects that you can try today

With all these wonderful projects Raspberry Pi for beginners you will definitely find something that will interest you. The best way to start – just pick a project and get to work. And in the process you will learn the basics of using the Pi and even inspired some ideas for your own project Raspberry Pi!

Want more simple ideas for your Pi? How about those Christmas projects Raspberry Pi that can be implemented in General for the day?


Source: omgubuntu.ru

(Visited 8 times, 1 visits today)